• Home
  • /
  • Ferrari 575 Berlinetta (02-06) XB LED Tail Lights

Ferrari 575 Berlinetta (02-06) XB LED Tail Lights

(0) No Reviews yet
Questions?

Brand: Morimoto

B-ASY-LF355-4-MM

$1,200.00

PRODUCT OPTIONS

PART #: 1 x LF355



*Guaranteed Fitment
Easy Return

DESCRIPTION

Classic Ferrari owners know the beauty of these cars is unmatched. But those old taillights can get faded and cracked over time. That's where these new Ferrari LED taillights come in. They're made to fit perfectly on the Ferrari 575 Berlinetta and many other Ferraris from the 90s and early 2000s. Installation is easy and should only take an hour or two. These LED taillights plug right into your car's factory connectors with no extra work needed. They include splitters to make sure both lights on each side work together. If you want to keep the original setup, you can skip the splitters. The design is inspired by the Ferrari 488's lights and will make your 575 Berlinetta look modern while respecting its classic style. The lights have a red outer lens, smoked center, and textured inner optics, looking just like the original parts. They are built with UV-treated polycarbonate and strong ABS housing to last a long time. These lights will resist wear and tear, and you can trust they're made to match or exceed Ferrari's own quality. Note that these are designed for US-Spec vehicles; compatibility with other countries may vary.

FEATURES & BENEFITS

  • Perfect Fit: Direct bolt-on for Ferrari models from the mid-90s to early 2000s. Installation takes about an hour or two.
  • Easy Installation: Plug-and-play with factory connectors; includes splitters for coordinated light function.
  • Modern Look: Red outer lens, smoked center, and hidden LEDs, inspired by Ferrari 488.
  • Enhanced Functionality: Includes parking light, brake light (red), turn signal (amber), and reverse light (white).
  • Durable: UV-treated polycarbonate and strong ABS housing for long-lasting performance.

WHAT’S INCLUDED

  • Tail Lights: 4x (One Set) Ferrari XB LED Tail Lights

  • Wiring: Plug and Play Splitter Harness

WARRANTY INFORMATION

This Morimoto product includes a 5 Year limited warranty, serviced and supported by the Morimoto team in Atlanta, GA. This warranty does not cover modifications, alterations, or misuse. For additional information, Click Here.

TECHNICAL SPECIFICATIONS

  • Input: Ferrari 5-Pin OEM

  • Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)

  • Light Source: SSC LED

  • Brake Light: Red (Bright)

  • Parking Light: Red (Dim)

  • Turn Signal: Amber

LINE DRAWINGS

COMPATIBILITY

  • Ferrari 575 Berlinetta: 2002-2006

  • Ferrari Part Numbers: 157522, 157123

  • NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.

COMPLIANCE

DOT, SAE, FMVSS108 Standards

INSTALLATION DOCUMENTS

Classic Ferrari: There is nothing that looks better. Nothing that sounds better. Nothing with more character... than a classic Ferrari. Everything about these cars is the pinnacle of perfection for analog-enthusiasts, and we wouldn't change a thing. Well, except for the taillights, that are melted, faded, cracked, and based on incandescent bulbs from the 80s. As long as the rear-end of your Ferrari is the only thing that everybody sees as you fly by, it might as well look good as good as it sounds, right?


Compatible: With the Ferrari F355, the 550, the 575, the 360, and the F50, these are a direct bolt-on fitment for many beloved Ferraris from the mid-late 90s and early 2000s. They use all of the stock mounting points, and should not take more than an hour or two to install all four tail lights.


Plug n Play: The Ferrari LED tail lights from Morimoto are designed to work without any modifications. These tail lights will plug into the factory connectors for the stock lights. Each set includes signal splitters too, which will allow the pair of lights on each side of the car to work in unison (rather than one acting as the turn signal, the other as the brake, etc). If you prefer to leave the setup as-is from the factory, you don't need to use the splitter.


Style: Inspired by the design of the tail lights on the Ferrari 488, these are the perfect solution to modernize the rear end of your 355, 550, 575, 360, or F50 without compromising the work of Pininfarina. They look natural on the car, with their red outer lens, smoked central lens, and textured inner optics. There are no visible LEDs from the outside, these could truly pass for original-equipment parts.


Functions: The optical light pipe that highlights the outside perimeter of each light acts as a low intensity parking light, and high intensity brake light (red). The middle section acts as the turn signal and hazard light (amber). The center of each light is a high-intensity reverse light (white).


Well-Built: The durable polycarbonate lens has been UV treated, and will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than cheap aftermarket tail lights, which is far from the case here. The price is justified, and as the saying goes: you pay for what you get. These tail lights are built to exceed OEM Ferrari quality and should easily last the life of your classic car.


NOTE:These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.

Ratings & Reviews

No reviews available

Be the first to Write a Review

Sign up for our newsletter