• Home
  • /
  • Chevrolet Corvette C7 (14-19) XB LED Tail Lights

Chevrolet Corvette C7 (14-19) XB LED Tail Lights

(0) No Reviews yet
Questions?

Brand: Morimoto

B-ASY-LF754-MM

$595.00

PRODUCT OPTIONS

PART #: 1 x LF754



*Guaranteed Fitment
Easy Return

DESCRIPTION

Our new C8-Style XB LED tail lights for the C7 Corvette hit the nail on the head when it comes to quality, performance, and a modernized look. These are a direct bolt-on fitment for all Chevrolet Corvettes from 2014-2019 including the coupe and convertible. They use all the stock mounting points, include brand-new outer air-exhaust trim pieces, and should not take more than an hour or two to install. The C8-Style light pipes that dominate each housing acts as a low intensity parking light, a high intensity brake light (red). Above that, the reflectors operate as LED turn signals which can run in either a standard on/off flashing mode or a sequential setup, which is easy to change during installation. One of those two reflectors doubles as the white reverse light, which is also plug n play with your factory reverse light circuit. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are backed with an industry-leading five year warranty.

FEATURES & BENEFITS

  • OEM Plus: The Morimoto XB Tail Lights are the perfect solution to update the rear end of your C7 Corvette with a more modern, but undeniably Vette-inspired style.
  • Plug n Play: Connects directly to original wire harness for full functionality, with no modifications required.
  • Unbeatably Bright: Brake light, reverse light, and amber LED turn signal thanks to modern TIR and reflector-based LED optics.
  • Back up Boost: Optional Back up light bar will plug n play and boosts output in reverse by over 300%!
  • No Compromise: Co-developed, tested and distributed by Morimoto here in the USA, produced using the best materials & backed with a five-year warranty.

WHAT’S INCLUDED

  • Tail Lights: 2x (One Pair) C8 Style XB LED Tail Lights

  • Trim Bezels: 2x Tail Light Trim Bezels

  • Clips: 2x Wire Clips

WARRANTY INFORMATION

This Morimoto product includes a 5 Year limited warranty, serviced and supported by the Morimoto team in Atlanta, GA. This warranty does not cover modifications, alterations, or misuse. For additional information, Click Here.

TECHNICAL SPECIFICATIONS

  • Input: GM Multi-Pin OEM

  • Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)

  • Light Source: SSC LED

  • Reverse Light: White

  • Brake Light: Red

  • Parking Light: Red

  • Turn Signal: Amber

  • Turn Signal Modes: Standard or Sequential (Configurable)

  • Rear Reflex Reflectors: Red (DOT) or Smoked (Non DOT)

LINE DRAWINGS

COMPATIBILITY

  • Chevrolet Corvette C7: 2014-2019 (Stingray, Z51, Grand Sport, Z06, and ZR1)

  • Replaces GM Part #: 23219535, 23170469, 23170470, 23219536

  • Note: These tail lights were developed for compatibility with North American vehicles. Morimoto does not guarantee compatibility on cars outside of North America.

COMPLIANCE

Red Lens model meets DOT, SAE, FMVSS108 Standards. Smoked Lens model is not compliant for on-road use in the US.

INSTALLATION DOCUMENTS

Corvette: There is something to be said about a Vette with four oval tail lights, and then there's the latest and greatest C8 style... but if your C7 is stuck in the middle, where does that put you? It's time to do something about that. So long as the rear-end of your Vette is the only thing that everybody sees as you fly by, it might as well look good as good as it sounds, right? Our new C8-Style XB LED tail lights for the C7 Corvette hit the nail on the head when it comes to quality, performance, and a modernized look.


Compatible: these are a direct bolt-on fitment for all Chevrolet Corvettes from 2014-2019 including the coupe and convertible. They use all the stock mounting points, include brand-new outer air-exhaust trim pieces, and should not take more than an hour or two to install.


Plug n Play: The Corvette C7 Gen II tail lights from Morimoto are designed to work without any modifications. These LED tail lights will plug into the factory connectors for the stock lights on all US-spec cars, and do not need any extra resistors, modules, or adapters for a completely plug n play, error-free install. While the parking lights were problematic on earlier Gen Morimoto tails for the C7, those kinks have been completely ironed out here--making these truly plug n play and problem free.


Functions: The C8-Style light pipes that dominate each housing acts as a low intensity parking light, a high intensity brake light (red). Above that, the reflectors operate as LED turn signals which can run in either a standard on/off flashing mode or a sequential setup, which is easy to change during installation. One of those two reflectors doubles as the white reverse light, which is also plug n play with your factory reverse light circuit.


Back up Boost: Reverse lights are often over-looked, but not with the Morimoto XB Gen II tail lights for the C7 Vette. While they come standard with powerful LED reverse lights built into housing, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going... no matter the direction!


Style and Safety: All Morimoto tail lights are designed to comply with all DOT and SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.

Ratings & Reviews

No reviews available

Be the first to Write a Review

Sign up for our newsletter