DESCRIPTION
Introducing the Morimoto XB LED Headlights for the 2019-2023 Ford Ranger—a game-changer for truck enthusiasts. These headlights offer a complete optical upgrade, boasting triple Bi-LED projectors for an exceptional light output. With three low beams and three high beams, they provide maximum brightness and width, outperforming stock halogen or LED headlights and aftermarket options. The Morimoto XB headlights feature a captivating start-up sequence, adding a touch of style to your vehicle. Their LED daytime running lights are powered by Osram 5000K LEDs, ensuring visibility even during the day. The turn signal function is equally impressive with a full sequential setup. These headlights are DOT approved, meeting and exceeding all safety regulations. Installation is a breeze with their plug-and-play design, compatible with both basic halogen and higher-end projector and LED DRL-equipped trucks. Upgrade your Ford Ranger's lighting with the Morimoto XB LED Headlights, and experience unmatched performance and style on the road or trail.
FEATURES & BENEFITS
- Triple Bi-LED Projectors: Max brightness with 3 low and high beams.
- Stylish Start-Up Sequence: Captivating projector illumination.
- Daytime Running Lights: Osram 5000K LEDs for daylight visibility.
- Full Sequential Turn Signal: Safe and stylish turn signal function.
- DOT Approved: Meets safety regulations for worry-free installation.
WHAT’S INCLUDED
Headlights: 2x (One Pair) 19+ Ranger XB LED Headlights
Wiring: Plug and Play Harness, Fuse Tap
WARRANTY INFORMATION
TECHNICAL SPECIFICATIONS
Intensity: 2,600lm (Raw; each)
Traffic Pattern: LHD Only
Input: Ford Multi-Pin OEM
Functions: DRL (White), Turn, Parking, Low, High
Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
Optic: Kuria Optic BI-LED
UV Coating: Momentive UVHC3000
LINE DRAWINGS
COMPATIBILITY
Ford Ranger: 2019-2023
NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.
COMPLIANCE
Much Needed: Whether you are working on building a Ford Ranger up for to be a road warrior or trail blazer, there's one thing that the original headlights lack... and that is: Everything. So what does your truck need? Triple Bi-LED headlights with a crazy bright daytime running light, a sequential turn signal, blacked out internals, and a fantastic beam pattern. The Morimoto XB LED headlights for the 2019+ Ford Ranger will do the trick!
Six Low Beams and Six High Beams: First things first. These are the first and only set of headlights in the entire Morimoto XB lineup that use not one, not two, not three, but three Bi-LED projectors. Yes that is three low beams, and three high beams to provide you with maximum output. These things are much brighter and wider than the stock halogen or LED headlights, and will also out-perform other options out there in the aftermarket too.
Start up Sequence: And if the optical upgrade isn't enough for you, then surely the special start-up sequence on the projectors will reel you in. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. While it does absolutely nothing for performance, you can't deny the cool-factor!
Daytime Running Light: Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. The turn signal function uses the same optics paired with amber LED chips to produce a full sequential setup that's equally sexy. For those who are a bit more traditional... Yes... they can also be setup to run as solid on/off style signal too.
DOT Approved: Make no mistake, these will produce a much better result than slapping some LED replacement bulbs into your stock headlights. Their triple-projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated adjusters.
Plug and Play: Wiring is easy too! The Morimoto XB Ranger headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. These headlights will work with trucks that came stock with the basic halogen headlights, and the higher-end version with the projectors and LED DRL.
Whether you're interested in something off the shelf or a brand new product designed exclusively for you: Connect with Morimoto Today!